FREE On-site Product Demo!
Want to see how the DOMINO System will benefit you?
Australia:
Call us free on 1300 063 900 or click here to contact us!
New Zealand:
Call us free on 0800 337 866 or click here to contact us!
Our Knowledgeable demonstrators will make arrangements to visit you at your workshop or on-site
If you experience difficulties reading the PDF files you may need to download Adobe PDF reader.
To download Adobe PDF Reader click here 
Latest News/Specials
New DOMINO XL DF 700
With DOMINO XL the tool can come to the workpiece, instead of the workpiece having to come to the tool. Fast, simple, precise and extremely stable - with measurably shorter set-up times and time savings of up to 50 percent compared with bench-mounted tools. That makes the DOMINO XL ideal for furniture and door construction and for producing structural joints in solid wood.
Watch DOMINO XL Video Review: |
 |
||
| Watch review part 1 | Watch review part 2 |
New Accessory: Self Centering Guide Stop(SCG)
Like the MGS guide, the stops on the SCG-10 guide are infinitely adjustable from 3/4" apart (3/8" from center) up to 5-1/4" apart (2-5/8" from center). The stops are movable using a sliding dovetail arrangement. This allows the stops to slide freely while remaining captive to the guide, and when clamped in position, are rigidly drawn tight to the guide and firmly locked.
The dovetail saddles (clamps), dovetail bases, and Stop Arms are precision CNC machined from aviation grade billet aluminum, with a hard anodize finish for protection, appearance, and durability. The coupling cable is steel wirerope for strength, and a plastic outer coating for durability. The detent positions for the stop arm's up and down positions are controlled with micro ball plungers with stainless steel balls to last a lifetime.
SCG Guide Features
- - The SCG-10 guide is easily installed and removed from your Domino with two captive thumbscrews (included) using the existing mounting holes on the bottom of your joiner. No modification of your joiner is required.
- - Adjustable Centering Plates align the SCG-10 to your Domino for repeatable installation.These centering plates adjust sideways to capture the base of the Domino, ensuring that it is positioned exactly the same every time.
- - The stop arms are infinitely adjustable from 3/8" to 2-5/8" from the centerline of the mortise. This means you can place a tenon in the center of board widths from 3/4" to 5-1/4".
- - The stop arms are easily flipped forward for use, and flipped back when not in use. Ball detents hold the stops in the up or down position.
- - The clamping thumbscrews are custom made from high impact plastic for a comfortable grip, and a steel threaded insert for long life and reliability.
- - All aluminum components are precision milled from aviation grade aluminum and Sulfuric Anodize Per MIL-A- 8625 Type II Class 2 standards.
Rigidity and Strength
With a tool as precise as the Domino tenon joiner, it is critical that mortise positioning be accurate every time. Every aspect of the SCG-10 was driven by rigidity and strength as the goal.
The sliding dovetail clamping system is designed to allow free lateral movement during adjustment, but to fully retain the stop assemblies no matter how loose the clamp. The dovetail clamp firmly locks the stops in position after adjustment.
- When the two halves of the dovetail saddle are tightened down, the dovetail base is pulled firmly inward, so the shoulder of the base registers off the face of the saddle.
- The compound clamping action increases the frictional surface area for a more rigid hold. As the clamp is tightened, the frictional area includes the normal dovetail taper, but also the shoulder.
The SCG-10 has Rock Solid Stop Arms.
- The pivot pin is high-grade stainless steel with a 3-point contact area and is hard pressed through the body of the stop arm.
- The lengthy contact area between the extra thick stop arm and yoke prevents any lateral deflection.
DOMINO DF500 featured in Australian Woodsmith Magazine 91
The Festool domino system is designed as a mortising machine, however with a little lateral thought you can use it to create box pin joints.
"Necessity is the mother of invention". Cutting oversized box pins is usually done by drilling out the corners of the pin with a 10mmdia brad-point bit and then using a combination of a jig saw and a band saw to remove the waste.
Accessory : MGS-20
NEW MGS-20 Multi-position guide stop can be positioned anywhere, ranging from 3/8" (9mm) up to 2-5/8" (67mm).
The MGS-20 is quick and easy to attach to the DOMINO and comes equipped with two adjustable centering plates that ensure exact positioning every time - perfect for cabinet makers and building drawers!
Download Mgs-20 Manual
Watch Video:
Using Domino with MGS-20 to make a drawer(Part 1 of 2)
Using Domino with MGS-20 to make a drawer(Part 2 of 2)
